Hello guys, this is a Toyota Prius Hybrid 2014 came from US, it lost all smart keys, so today I gonna use the Autel MaxiIM IM608 + APB112 Simulator to program keys. This is the new key to be programmed, plug the Autel IM608 connector into OBD2 port of Toyota, let’s get to start: IMMO >> Accept >> Toyota >> Manual selection >> USA >> Prius >> 2010-2018 >> Smart key >> Keyless system(CAN) >> Back up immobilizer data >> OK Wait backing up until 100%... Rename the EEPROM file, press “Confirm” to save. OK >> Generate simulator key >> OK Select EEPROM file saved just now, press “OK”. Retrieving critical data... OK >> Connect APB112 key simulator with IM608, press “OK”>> OK APB112 simulator key is generated successfully, press “OK” to continue. Add smart key >> Yes >> OK >> OK Follow the prompts to operate: Put the APB112 simulator close to START button. Put the smart key to be programmed close to START button. It will take about 30 seconds... Learning succeeded, press “OK” to complete. Okay, let me test the smart key, everything works correctly, key programming has done! This is using Autel IM608 & APB112 Smart Key Simulator to program a Toyota Prius Hybrid 2014 when all key lost.
https://www.obd2shop.co.uk/
0 Comments
Today I’m gonna program a blade key for Ford Fiesta 2011 with the Obdstar x300 Pro4 Key Programmer. This is a working key and a new key to be programmed. Plug Obdstar x300 Pro4 connector into OBD port, let’s start: Diag program >> Ford/Lincoln V33.06 >> Ford >> Fiesta Europe >> 2008-2012 >> Blade Type 1 >> Add a key Switch ignition on, press “Enter”. You have to complete the following procedures, engine can be started: 1. Switch ignition off. 2. Switch ignition on with key 1 for 3 seconds, and then switch off and remove the key. 3. Switch ignition on with key 2 for 3 seconds, and then switch off and remove the key. 4. If you want to add more keys, please repeat procedure 3, complete. Press “Enter”. Finish, press “Enter” to complete. So let’s test the key, car starts and runs normally. Key programming has done!
Using Obdstar x300 Pro4 key master to add a key for 2011 Ford Fiesta successfully. https://www.obd2shop.co.uk/ |
Archives
April 2024
Categories
All
|